Loading... Please wait...
  • Leverbacks; Yellow Sapphires 0.79 cts; Diamonds 0.25 cts - details below
  • Leverbacks; Yellow Sapphires 0.79 cts; Diamonds 0.25 cts - details below

Montana Yellow Sapphire And Diamond Dangling Earrings In 18 KT White Gold


Product Description

This intricate pair of white gold filigree earrings is embellished with eight Montana-mined bright yellow sapphires.  The placement of the yellow sapphires against the delicate white gold background makes for a bewitching combination.  Additionally, each earring features a brilliant white center diamond for added sparkle. These spectacular dangling earrings are also available in additional color choice combinations (both sapphire and gold tones).



"I wanted to create a set of intricately feminine earrings. Once the basic design was set, I decided to make different combinations of colored gemstone and metal colors so each pair would remain unique. I chose ethically sourced, fancy colored Montana-mined sapphires for their spectacular range of colors. I purchased the sapphires from a gemologist/gem dealer who, along with the designer, donated the Chonchita Montana Sapphire Butterfly to the Smithsonian Institute."                                           Design inspiration by Madeline.


Price: $2,300

Stock Number: E-2WGYS18



Metal: 18 kt white gold

Rhodium Treated?: Yes

Length (top to bottom): 45 mm; (approx. 1 ¾ inches)

Width (maximum side to side): 20 mm; (approx. ¾ inch)

Deep (maximum front to back): 4 mm; (approx. 1/8 inch)

Type: pierced; lever back wire locking posts

Piece weight (gms): 6.8 gms

Total carat weight (TCW) piece: 1.04 cts



Species or variety of colored stones: Sapphires (mined in the US state of Montana)

Color: yellow

Number of colored stones: 8 pieces

Shape: round

Treatments/enhancements: heat

Total carat weight (TCW) of colored stones: 0.79 cts



Number of diamonds: 2 pieces

Shape: round

Average color and rating: G (near colorless)

Clarity range: VS1

Average clarity rating: VS1

Treatments/enhancements: none

Total carat weight of diamonds (DCW): 0.25 cts

Other Details

Protect your jewelry from impact against hard surfaces and avoid contact with abrasive surfaces. All gemstones, including diamonds, can chip, scratch, or abrade under the right circumstances.
Care specifics:
With wear, rhodium plating can thin to the point where a yellowish tinge may show through. Periodic re-coating with rhodium will revive the original bright white color. Re-plating does not damage the gemstones.
The best method for cleaning all your jewelry is to soak each item in a mixture of lukewarm water and gentle dish washing liquid followed by a very light cleaning with a soft child’s toothbrush.
Additional Cleaning Instructions:
Place the item(s) in a fine mesh strainer and rinse to remove the soap. Gently place each item on a lintfree cloth and softly pat them dry. See the Care and Cleaning Section of the Website for a more detailed explanation.