Loading... Please wait...
  • Post & Friction Back; Sapphires 1.87 cts; Diamonds 0.82 cts - details below
  • Post & Friction Back; Sapphires 1.87 cts; Diamonds 0.82 cts - details below

Diamond and Sapphire Dangling Earrings in 18 KT White Gold


Product Description

Richly-hued deep blue marquise cut sapphire gemstones the color of the Atlantic Ocean are strikingly displayed against 18kt white gold in these stunning earrings.  The radiant color of the sapphires is further enhanced by multitudes of sparkling diamonds, lovely scrollwork and milgrain design.  This beautiful vintage-inspired design is sure to be enjoyed for many generations to come.



"Inspired by the upside-down shape of the center leaf of a fleur-de-lis, I decided to look for a pair of marquise-cut gemstones when attending the AGTA Gem Show in Tucson, Az. a few years ago. I ended up finding five matched pairs of gemstones in different colors, sizes and shapes. I liked them all so much, I decided to buy them all. Between the gemstone and metal color differences, I ended up with five pairs of earrings, each uniquely beautiful in its own way."                                                                          Design input by Anne.


Price: $5,300

Stock Number: E-14



Metal: 18 kt white gold

Rhodium Treated?: Yes

Length (top to bottom): 43 mm (approx. 1 5/8 inches)

Width (maximum side to side): 16 mm (approx. 5/8 inch)

Deep (maximum front to back): 3 mm (approx. 1/8 inch)

Type: pierced; post and friction back

Piece weight (gms): 12.1 gms

Total carat weight (TCW) piece: 2.69 cts



Species or variety of colored stones: Sapphires

Color: blue

Number of colored stones: 2 pieces

Shape: marquise

Treatments/enhancements: heat

Total carat weight (TCW) of colored stones: 1.87 cts



Number of diamonds: 88 pieces

Shape: round

Average color and rating: GH (near colorless)

Clarity range: VS1-VS2

Average clarity rating: VS

Treatments/enhancements: none

Total carat weight of diamonds (DCW): 0.82 cts



Other Details

Protect your jewelry from impact against hard surfaces and avoid contact with abrasive surfaces. All gemstones, including diamonds, can chip, scratch, or abrade under the right circumstances.
Care specifics:
With wear, rhodium plating can thin to the point where a yellowish tinge may show through. Periodic re-coating with rhodium will revive the original bright white color. Re-plating does not damage the gemstones.
The best method for cleaning all your jewelry is to soak each item in a mixture of lukewarm water and gentle dish washing liquid followed by a very light cleaning with a soft child’s toothbrush.
Additional Cleaning Instructions:
Place the item(s) in a fine mesh strainer and rinse to remove the soap. Gently place each item on a lintfree cloth and softly pat them dry. See the Care and Cleaning Section of the Website for a more detailed explanation.